Soft seated gate valves in ductile iron, oval body, flanged PN 25

Valvotubi soft seated gate valve Pn 25 art 97
get pdf
Article: 97
Flanges: UNI EN 1092-2 PN 25
Design: DIN 3352, EN 1074; Face to face length: EN 558-1, serie 15. DIN 3202 F5

Test pressure acc. to: EN 12266-1
Installation: horizontal
APPLICATIONS • Water supply • Drinking water • Fire fighting systems • Wastewater treatment
Epoxy paiting suitable for drinking water applications.

Soft seated gate valves, in ductile iron GGG40 with oval body and EPDM covered wedge, are suitable for drinking water applications, being coated with epoxy powder painting, not toxic. This kind of gate valves are inside screw, with non rising stem in AISI 420, wedge EPDM vulcanized and sliding rails on the body. The soft seated gate valves are full bore, have no pressure drops, with the EPDM covered wedge that is not affected by corrosion and that doesn’t need any maintenance. In case of need, o-rings on the stem can be replaced with the valve in the pipeline and in complete open position. Soft seated gate valves in ductile iron can be installed above or under the ground level, or in chambers. Standard execution is by handwheel, we accept on demand T key, reducing gear or electric actuator with suitable outlet flange ISO 5210 F10/F14.

 

Materials
body-bonnet ductile iron GGG40, EN-GJS-400-15
wedge ductile iron GGG40, EN-GJS-400-15 EPDM covered
handwheel cast iron GG25, EN-GJL-250
stem stainless steel X20 CR13
stem seat o ring
bonnet gasket EPDM
painting epoxy 250 mcr
DN L mm. H mm. D mm. Weight kg.
40 240 220 150 13
50 250 230 165 14
65 270 240 185 17
80 280 280 200 21
100 300 330 235 31
125 325 390 270 48
150 350 460 300 66
200 400 550 360 99
250 450 660 425 163
300 500 760 485 232
350 550 890 555 300
400 600 910 620 407
450 650 1050 670 460
500 700 1200 730 700
DN Nominal pressure Test pressure Mpa Max working pressure Mpa
mm BAR body seat 80°C
40-500 25 3,75 2,75 2,25